Fire Damage Restoration in New York - 24/7 Emergency Fire & Smoke Response

Trusted Fire Damage Restoration for New York Homeowners

Fire Damage Restoration - New York typically runs $2,800 to $9,500 for a standard room-and-contents job, with full-home mitigation ranging from $15,000 up depending on square footage and what burned. We arrive the same day you call, because smoke keeps moving through your walls and ductwork long after the flames are out. Carl Brandt leads Dryden Restoration New York, and our crews have been answering calls in the five boroughs since 2005. Call (315) 924-6992 and a live person picks up, 24 hours a day.

Call (315) 924-6992

We’re an independently owned and operated Kingswell company, which means we answer to you, not to a franchise manual. Every job gets a written price before any tool is touched, and every repair carries our 365-Day Done Right Promise in writing. If it fails within a year, we return and fix it at no charge.

Fire Damage Restoration Company

Fire Damage Restoration Company is a term homeowners search when they need a single crew that handles board-up, water extraction, smoke mitigation, structural cleaning, and rebuild coordination under one roof. In Jackson Heights and across New York, where brownstones, prewar co-ops, and newer high-rise units each burn differently, that coordination matters. Dryden Restoration New York provides the full sequence, with every phase priced in writing before work begins. Typical costs run $3,000 to $12,000 for a contained fire in a single room, and $20,000 to $60,000+ when structural framing, electrical, and full-content restoration are involved.

Board-Up and Structural Stabilization

After the fire department leaves, your building envelope may be open to weather, theft, and curious passersby. We secure openings with plywood and fasteners within hours of your call, then assess load-bearing elements that heat may have compromised. Our background-checked, uniformed technicians document every step with photos for your insurance file.

Content Triage and Pack-Out

Some contents can be cleaned on site; others need off-site treatment for smoke odor and soot. We inventory everything, separate salvageable from unsalvageable, and give you the list in writing. You make the final call on what gets restored and what gets documented for the adjuster.

Smoke Damage Restoration

Smoke Damage Restoration addresses what you can’t always see: microscopic smoke particles that embed themselves in drywall, insulation, upholstery, and HVAC ducts. Smoke from a kitchen fire in a New York apartment can travel through shared walls and corridors, affecting units two and three floors away. Dryden Restoration New York uses air scrubbers, thermal fogging, and hydroxyl generators to neutralize smoke at the particle level, not just mask it. Expect $1,800 to $6,500 for smoke restoration in a typical apartment, more when ductwork cleaning and full repainting are required.

Wall and Ceiling Decontamination

We remove the smoke film from painted and plaster surfaces using dry-chem sponges and wet cleaning appropriate to the substrate. In older New York buildings with plaster over lath, we match the original finish method rather than slapping on modern drywall compound. The goal is restoration, not renovation unless you ask for it.

HVAC and Duct Cleaning After Fire

Your forced-air system recirculates smoke particles through every room until the ducts are cleaned. We inspect the full run, clean accessible ductwork, and replace filters with the right MERV rating for your system. This step is often skipped by less thorough crews, and it is the single most common reason smoke odor returns weeks later.

Fire Damage Repair

Fire Damage Repair is the reconstruction phase: replacing burned studs, re-wiring damaged circuits, installing new drywall, and bringing finishes back to pre-loss condition. It’s different from mitigation in that it requires building permits in many College Point and New York jurisdictions and must be scheduled rather than dispatched the same day. Dryden Restoration New York provides a written scope of work for every repair phase, priced before we order materials. Typical repair costs run $4,000 to $18,000 for affected rooms, with larger structural repairs exceeding that when beam replacement or floor system work is required.

Structural Framing and Drywall Replacement

Heat weakens framing even when it doesn’t burn through it. We remove charred and heat-damaged wood, sister new members to code, and hang drywall to match the surrounding texture. In prewar buildings, we coordinate with your building management on fire-code requirements before opening walls.

Electrical and Plumbing Assessment

Fire can melt insulation on wiring behind walls, creating hazards that don’t show up for months. We bring in licensed electricians to test affected circuits and replace damaged runs to current New York City code. Plumbing near the fire gets pressure-tested for heat damage at fittings and seals.

Fire Damage Cleanup

Fire Damage Cleanup is the initial labor-intensive phase: removing debris, vacuuming loose soot, and stabilizing surfaces so secondary damage stops progressing. In New York apartments and homes, this often means working around insurance adjusters, building supers, and co-op board requirements. We handle that coordination. Dryden Restoration New York’s cleanup crews arrive with HEPA vacuums, air scrubbers, and containment barriers to keep soot from spreading to unaffected rooms. Costs range from $1,500 to $5,000 for light-to-moderate cleanup, and $8,000 to $15,000 when extensive debris removal and full-surface cleaning are needed.

Debris Removal and Hazard Disposal

Burned materials aren’t ordinary trash. We separate charred wood, melted synthetics, and compromised insulation, then dispose of them through channels that meet New York’s waste regulations. Your family doesn’t handle any of it, and you get a disposal manifest for your records.

Soot Containment During Cleanup

The moment cleanup starts, soot goes airborne and tries to migrate. We set negative-air containment in the work zone, seal doorways with plastic, and run HEPA air scrubbers throughout the cleanup process. This keeps your unaffected bedrooms and kitchen from becoming a secondary loss.

Smoke Odor Removal

Smoke Odor Removal is a technical process, not a spray-and-pray exercise. Odor molecules lodge in porous surfaces and off-gas for months unless they’re neutralized at the source. In New York’s older housing stock, that often means treating lath-and-plaster walls, hardwood floors, and decades of paint layers that have absorbed the smoke. Dryden Restoration New York uses thermal fogging, ozone treatment in unoccupied spaces, and hydroxyl generation for occupied areas to break down odor molecules rather than covering them up. Expect $900 to $4,000 for whole-apartment odor removal, depending on square footage and how long the smoke sat before treatment.

Thermal Fogging for Deep Penetration

A thermal fogger heats a deodorizing agent into a vapor that behaves like smoke, reaching the same cracks and pores the smoke did. It bonds with odor molecules and neutralizes them. We use this in combination with surface cleaning, because fog alone can’t remove the oily residue that holds the odor.

Ozone and Hydroxyl Treatment

Ozone treatment is effective but requires the space to be unoccupied for a period. Hydroxyl generators work in occupied spaces and are safe for people, pets, and plants. We choose the method based on your living situation and the severity of the odor, and we explain why in plain language before we start.

Fire and Water Damage Restoration

Fire and Water Damage Restoration are almost always linked. The water that puts out the fire becomes a second emergency, soaking flooring, drywall, and insulation while you’re still processing the fire itself. In New York, fire suppression systems in multi-unit buildings can dump hundreds of gallons into lower units. Dryden Restoration New York handles both in a single sequence: water extraction and structural drying first, then soot and smoke mitigation, then repair. Combined fire and water restoration typically costs $5,000 to $20,000 depending on how much water entered the building and how quickly it was extracted.

Water Extraction Before Smoke Work Begins

Water migrates downward and outward from the fire zone. We extract standing water using truck-mounted and portable extractors, then place air movers and dehumidifiers from Phoenix and XPOWER to pull moisture from structural cavities. Our technicians monitor relative humidity (RH) in the affected rooms daily until materials reach their target moisture content.

Drying Documentation for Your Adjuster

Your insurance company needs proof that drying was done properly before they’ll approve the rebuild. We document daily moisture readings, equipment placement, and final drying conditions in a report you can hand directly to your adjuster. That documentation also protects you if hidden moisture causes problems down the line.

Soot Removal

Soot Removal is the art of getting an oily, acidic residue off surfaces without driving it deeper or spreading it. Soot from a protein fire (like burned food) is nearly invisible but clings aggressively; soot from a synthetic fire (plastics, electronics) is thick and chemical-heavy. Different soots require different cleaning agents and techniques. Dryden Restoration New York identifies the soot composition before touching a wall, then uses the appropriate dry-chem sponge, wet cleaning solution, or media blasting method for each surface. Soot removal within a full fire restoration typically represents $800 to $3,000 of the total project cost.

Surface-Specific Cleaning Methods

Painted drywall, hardwood, tile, and metal each respond to different cleaning approaches. We test in an inconspicuous area first, then clean with the gentlest effective method. This protects your finishes while removing the acidic soot that will etch surfaces if left in place.

Contents Cleaning for Soot-Covered Belongings

Dishes, books, clothing, electronics, and furniture can often be restored if soot is removed before it bonds permanently. We use ultrasonic cleaning for non-porous items, HEPA vacuuming for fabrics or books, and dry media blasting for heavier deposits on tools or hardware. Items that can’t be restored are documented for your contents claim.

Brands We Service

We run Phoenix desiccant and refrigerant dehumidifiers, XPOWER axial air movers, and B-Air low-profile drying systems on fire and water loss jobs across New York. These are the machines used by commercial restoration crews, not the rental-counter units you’d find at a hardware store. Our technicians train on each brand’s operational curves and know when to rotate equipment to keep drying rates up.

We’ve also deployed Injectidry systems for drying inside wall cavities and under hardwood floors after fire suppression water wicks into places you can’t see. If you have equipment from a different brand or a job with unusual constraints, we’ll spec the right approach and explain the equipment we’re using and why. Whether you’re dealing with a small kitchen fire in Tribeca or a larger loss in Maspeth, we have the equipment to handle it.

Signs You Need a Pro Right Now

• You smell smoke a week later. Smoke odor that persists after cleaning means particles have penetrated porous surfaces and will keep off-gassing. The longer you wait, the deeper the odor bonds go.
• Walls feel damp near the fire zone. Fire suppression water saturates drywall and framing, and hidden moisture breeds mold within 48 to 72 hours. If a wall feels cool or wet to the touch days after the fire, structural drying is overdue.
• Soot keeps reappearing after you wipe it. Oily soot that smears instead of coming off with a sponge indicates the wrong cleaning method, which drives soot deeper. Acidic soot left on surfaces will permanently etch paint, metal, and glass.
• Electrical outlets or switches near the fire smell hot. Heat can melt wire insulation inside walls, creating a short-circuit hazard that won’t trip a breaker until it’s dangerous. If anything electrical near the burn zone behaves oddly, shut that circuit off and call us immediately.
• Your insurance adjuster is asking for documentation. Adjusters need moisture readings, soot composition notes, and a written scope of work to process your claim. The sooner a restoration company starts documenting, the smoother your claim goes.

Our Process, Step by Step

1. 1
   We answer the phone and arrive when we say we will. A live person takes your call at (315) 924-6992, asks about the fire’s location, size, and whether water was used. We give you a same-day arrival window, not a four-hour range that slips.
2. 2
   We assess the damage in writing. Carl Brandt’s crew walks the affected area, tests moisture levels in walls and flooring, identifies soot composition, and checks HVAC contamination. You get a written scope of work and a written price before any equipment leaves the truck.
3. 3
   We contain and stabilize the site. We set negative-air containment in the work zone, remove loose debris, extract standing water, and place air movers and dehumidifiers. The goal in the first 24 hours is stopping secondary damage.
4. 4
   We clean, dry, and deodorize. HEPA vacuuming, surface-specific soot removal, thermal fogging, and structural drying all happen in sequence. We monitor humidity daily and adjust equipment until materials reach their pre-loss moisture levels.
5. 5
   We repair, document, and guarantee. The rebuild phase follows: framing, drywall, paint, and finish work. Every repair carries the 365-Day Done Right Promise in writing. If it fails within a year, we return and correct it at no charge.

How Much Does Fire Damage Restoration Cost in New York?

Our Service Area Near New York

We serve New York and the surrounding borough neighborhoods, including the East New York area, the Financial District, Upper West Side, Brooklyn Heights, Greenpoint, Maspeth, Jackson Heights, College Point, East Village, Tribeca, and Chinatown. Typical response time within Manhattan is 60 to 90 minutes. In the outer boroughs, we’re usually on site within two hours. For full details on our service area, see our Fire Damage Restoration in New York page.

Frequently Asked Questions About Fire Damage Restoration in New York

Schedule Your Fire Damage Restoration Service in New York Today

We’re ready when you are. Call (315) 924-6992 any time, day or night, and a live person will take your call and schedule a same-day visit. You’ll get a written price before we start, and a written guarantee on every repair. If you’d rather look around first, start with our home page to see how we work.

Written by Carl Brandt, Owner at Dryden Restoration New York, serving New York since 2005.